Our Innovations
Industry Focused Products!
Especially designed for deep-groove substrates. Nano scale. No wax, no oil.
Usage: 0.4-0.6% Extrusion
TS868C Full Effect Powder
Economical type for groove substrates. No wax, no oil.
Usage: 0.4-0.6% Extrusion
TS808C Full Effect Powder
Designed for white powders. Excellent antistatic performance for groove substrates. No wax.
Usage:0.4-0.6% Extrusion
TS888 Charging Agent
Designed for white powders. Excellent antistatic performance for groove substrates. No wax.
Usage:0.4-0.6% Extrusion
TS882 Charging Agent
Causes no yellowing. Excellent antistatic performance.
Usage:0.1-0.5% Extrusion
T308 Charging Agent
One-coat deposition additive. Excellent antistatic performance.
Usage:0.1-0.5% Extrusion
T368 Charging Agent
Highly effective for galvanized, aluminum-magnesium alloy, thick cast iron and cast aluminum workpieces.
Usage:0.5-1.5% Extrusion/Post-blending
XP506 Full-Effect Defoamer
Designed for transparent powders. Non-wax, amid-free. Excellent degassing performance.
Usage:0.5-1.5% Extrusion
XP966B Defoamer
Does not affect the texture of thick-film coatings. Excellent degassing performance.
Usage:0.5-1.5% Extrusion/Post-blending
XP109 Defoamer
Effective for cast iron and cast aluminum parts. Enhances coating hardness and scratch resistance.
Usage:0.5-1.5% Extrusion/Post-blending
XP301B Direct-add Defoamer
Specifically designed for porous substrates. Highly effective for pp coatings on galvanized parts.
Usage:0.5-1.5% Extrusion
XP101-4C Defoamer
Excellent degassing performance with outstanding anti-yellowing properties.
Effectively eliminates craters and can replace benzoin.
Usage:0.5-1.5% Extrusion
AW51 Defoamer
Wax-free. Almost no influence on gloss or leveling. Helps improve powder fluidity and powder charging.
Usage:0.3-0.6% Grind with the flakes
TS188 Special Effect Anti-caking Agent
Prevents powder caking during high-temperature storage and transportation.
Improves powder fluidity and sprayability.
Usage:0.3-0.6% Grind with the flakes
YW668 Anti-Caking Agent
Prevents powder buildup and improves powder flowability.
Enhances texture uniformity and storage stability.
Usage:0.5-1% Extrusion
SS02 Anti-Caking Agent
Prevents caking and wall sticking while enhancing powder deposition efficiency.
Usage:0.5-1% Grind with the flakes
SS03 Anti-Caking Agent
Usage:0.1-0.2% Post-blending
CL01 Alumina C
Wax-free. Almost no influence on gloss or leveling. Helps improve powder fluidity and powder charging.
Usage:0.3-0.6% Grind with the flakes
PG388 Anti-caking Agent
Provides effective anti-yellowing performance during high-temperature baking (up to 280°C) and gas oven curing.
Usage:0.5-1.5% Extrusion
AS130 Anti-Yellowing Agent
Provides effective anti-yellowing performance during high-temperature baking (up to 250°C) and gas oven curing.
Usage:0.5-1.5% Extrusion
AS260 Anti-Yellowing Agent
Provides effective anti-yellowing performance during high-temperature baking (up to 250°C) and gas oven curing.
Usage:0.5-1.5% Extrusion
AS261 Anti-Yellowing Agent
Provides effective anti-yellowing performance during high-temperature baking (up to 220°C) and gas oven curing.
Usage:0.5-1.5% Extrusion
AS160 Anti-Yellowing Agent
Provides effective anti-yellowing performance during high-temperature baking (up to 220°C) and gas oven curing.
Usage:0.5-1.5% Extrusion
AS161 Anti-Yellowing Agent
Provides effective anti-yellowing protection by preventing thermal oxidation, helping maintain the brightness and vividness of fluorescent powder coatings.
Usage:0.5% Extrusion
1010 Antioxidant
Non-yellowing and compatible with leveling and storage stability, significantly shortens curing time(200℃-5min). Suitable for both indoor and outdoor systems, especially HAA system.
Usage:0.1-0.3% Extrusion
CJ91 Low Temperature Curing Accelerator
Non-yellowing and compatible with leveling and storage stability, significantly shortens curing time(200℃-40sec-0.5%). Suitable for both indoor and outdoor systems, especially texture powders.
Usage:0.1-0.2% Extrusion
CJ95 Low Temperature Curing Accelerator
Non-yellowing and compatible with leveling and storage stability, significantly shortens curing time(200℃-5min). Suitable for both indoor and outdoor systems, especially flat powders.
Usage:0.1-0.2% Extrusion
CJ96 Low Temperature Curing Accelerator
Reduces the curing temperature of epoxy and hybrid powders to 140°C while improving texture definition, edge coverage, and coating hardness.
Usage:0.1-0.3% Extrusion
301Q Low Temperature Epoxy Curing Accelerator (Diphenyl Imidazoline)
Can be used as a fast-curing agent and low-temperature curing agent, meeting curing conditions 110°C × 30 min and improving edge coverage, hardness, sag resistance, and texture definition.
Usage:0.05–0.3%/ 5–7% based on the epoxy resin Extrusion
307Q Ultra-Low Temperature Epoxy Curing Accelerator
Used with blocked sulfonate catalysts to produce durable wrinkle finishes with excellent weather resistance, mechanical strength, and wash resistance.
Usage:3.0-4.2% Extrusion
1174 Hydroxyl Polyester Crosslinker
Designed for weather- and chemical-resistant polyurethane powder coatings, with a 170°C deblocking temperature and stable curing performance.
Usage:10-15%of hydroxyl polyester resin Extrusion
1135 Polyurethane Crosslinker
A β-hydroxyalkylamide curing agent for outdoor applications, offering low-temperature curing, low toxicity, and non-irritating properties.
Usage:Polyester resin: T105 – 95:5 Extrusion
T105 Pure Polyester Curing Agent
A β-hydroxyalkylamide curing agent for outdoor applications, offering low-temperature curing, low toxicity, and non-irritating properties.
Usage:Polyester resin: T105M – 93.5:6.5 Extrusion
T105M Pure Polyester Curing Agent
Provides reliable curing at 200°C × 30 min and enhances texture definition when used with texture agents, with good anti-yellowing performance.
Usage:2–4% based on the epoxy resin Extrusion
N01 Dicyandiamide
A cost-effective leveling agent for various powder coating systems that effectively reduces pinholes, craters, and fisheyes.
Usage:0.5-1.5% Extrusion
TL210 Economical Leveling Agent
Provides high-efficiency leveling and surface smoothness while reducing pinholes, craters, and orange peel, with excellent pigment dispersion.
Usage:0.5-1% Extrusion
TL88 Pure Leveling Agent
Delivers excellent leveling, fullness, and clarity while increasing gloss by approximately 5–10 GU.
Usage:0.5-1% Extrusion
TL89 Mirror-Like Leveling Agent
Suitable for pure epoxy and hybrid systems, providing stable medium-gloss finishes in hybrid powder coatings.
Usage:3-10% based on the epoxy resin Extrusion
T68 Matting Agent
Offers excellent storage stability and leveling, with gloss as low as 4 GU, while being wax-free, easy to grind, scratch-resistant, and stable under different curing temperatures.
Usage:2-4% Extrusion
X988 New Anti-Yellowing Matting Agent
A non-reactive polyester matting agent for PES/TGIC outdoor powder coatings, achieving approximately 14 GU gloss at 4–6% dosage.
Usage:4-6% Extrusion
3360 Physical Matting Agent for Polyester
A reactive matting agent for outdoor polyester powder coatings, capable of achieving gloss below 5 GU or even a zero-gloss finish, as well as semi-gloss finishes.
Usage:1:3 with polyester Extrusion
RS-28 Chemical Matting Agent for Polyester
Improves resin and pigment/filler wetting, reduces pinholes and orange peel, and enhances gloss, especially in high-transparency powder systems.
Usage:1% Extrusion
TL701 Gloss Enhancer
Produces extremely fine sand textures and matting effects at low addition levels.
Usage:0.1-0.2% Extrusion
SW501 Ultra-Fine Sand Texture Agent
Produces fine and uniform sand textures with a smooth and delicate surface feel. Cost-effective type.
Usage:0.1-0.3% Extrusion
SW65 Fine Sand Texture Agent
Cost-effective solution for coarse, medium and fine sand-textured powder coatings.
Usage:0.1-0.3% Extrusion
TL25 Universal Sand Texture Agent
Provides strong 3D texture, excellent recessed-area coverage and adjustable gloss and texture size. Suitable for high-filler systems. Excellent extrusion performance.
Usage:0.6-1.2% Extrusion
LT02 3D Sand Texture Agent
A fluorine-free sand texture additive that forms a uniform textured finish through rapid chemical reaction.
Usage:1.5% Extrusion
WF-62 Fluorine-Free Sand Texture Agent
Produces fine, dry sand textures and can also be used as an anti-sagging additive.
Usage:1% Extrusion
P308 Bentonite
Creates a clear, uniform reticular hammer texture with stable recoating performance.
Usage:0.1-0.3% Extrusion
AS303 Hammer Tone Agent
Produces a fine texture effect, commonly known as a wrinkle agent or ripple additive.
Usage:0.1% Extrusion
AS01 Fine Texture Agent
Produces large decorative patterns with improved substrate coverage. Suitable for large floating textures in epoxy systems.
Usage:0.1-0.5% Extrusion
AS10 Large Texture Agent
Creates large, strong 3D wrinkle textures, even on thick workpieces, castings, matte and other difficult-to-texture applications.
Usage:0.2-0.8% Post-blending
AS7B Special Effect Winkle Finish Agent
Creates strong 3D wrinkle textures even in smooth powders, reclaimed powders, and under cold-oven curing conditions.
Usage:0.2-0.8% Post-blending
AS3B Special Effect Winkle Finish Agent
Creates strong wrinkle, hammer, and orange-peel textures, even on thick workpieces and cast parts under cold-oven curing conditions.
Non-contaminating.
Usage:0.1-0.3% Post-blending
C108 3D Texture Agent
Significantly improves scratch and abrasion resistance while offering high transparency, wax-free, smokeless, and anti-agglomeration properties.
Usage:0.3-1% Extrusion
SK39B High Efficiency Wear-Resistance Agent
A wax-free additive specially designed for indoor and outdoor sand-texture powder coatings, providing excellent hardness and wear resistance.
Usage:0.5-1% Extrusion
SK05 Anti-Fingerprint & Wear Resistant Agent Agent
A modified composite wax that achieves 2H+ hardness at low dosage, provides good abrasion resistance, and can deliver over 90 GU gloss at 0.5% dosage.
Usage:0.5-1% Extrusion
SK06 Special Effect Hardener
A cost-effective, smokeless hardening solution with no low-molecular-weight volatiles, designed to significantly improve coating hardness.
Usage:0.5-1% Extrusion
SK11 Special Effect Hardener
Enhances surface hardness, scratch resistance, abrasion resistance, and impact resistance while complying with EU RoHS requirements.
Usage:0.5-1% Extrusion
H9 Wax-Free Super Hardener
Enhances hardness, scratch resistance, abrasion resistance, and impact resistance; wax-free and heavy-metal-free, complying with EU RoHS requirements.
Usage:0.5-1% Extrusion
H6 Wax-Free Super Hardener
A modified composite wax that achieves 2H+ hardness at low dosage, with excellent abrasion resistance, easy paper release, and high gloss.
Usage:0.5% Extrusion
AW600B Special Effect Hardening Agent
Its high PTFE content provides excellent slip, lubrication, abrasion, and scratch resistance without affecting gloss, and it is FDA-approved for food contact applications.
Usage:0.3-1% Post-blending
AW807 PTFE-Modified Polyethylene Wax
With a particle size below 14 μm and a melting point of 130°C, AW95 effectively improves surface hardness and wear resistance.
Usage:0.3-1% Post-blending
AW95 PTFE-Modified Hardening Wax
Designed for externally added metallic pigment systems, improves surface hardness and scratch resistance, eliminates fingerprints, and enhances metallic effect, dispersion, and gloss.
Usage:0.5-2% Post-blending
POL65A Finger-Print Eliminator for Aluminum Pigment
Prevents edge burning, sand piling, and picture-frame defects, especially in sand-textured powder coatings.
Usage:0.3-0.5% Extrusion
SW005 Special Effect Sand Surface Flattening Agent
Provides excellent anti-fingerprint performance while improving film clarity, surface smoothness, and scratch resistance.
Usage:0.3-0.7% Extrusion
TS003A Anti-Fingerprint Agent
Improves flow, smoothness, fullness, and gloss while effectively reducing pinholes, especially in thick coatings up to 150 μm.
Usage:0.3-0.5% Extrusion
TS100 High-Gloss Leveling Agent
Increases gloss by 3–7 units, improves leveling, and helps eliminate orange peel, pinholes, bubbles, and craters. Excellent pigment dispersion.
Usage:0.5-1% Extrusion
TS109 Leveling & Gloss Improve Agent
Effectively eliminates pinholes caused by oil, silicone, resin contamination, and insufficient equipment cleaning. Suitable for recycled and mixed powders.
Usage:0.5-1% Extrusion
NEW051 Anti-Contamination & Porosity Eliminator
Improves surface smoothness, fullness, fineness, and gloss while reducing orange peel, haze, and fingerprint marks.
Especially effective for black matte and semi-gloss powder coatings.
Usage:0.7-1% Extrusion
AS141 Powder Lubricant/ Orange Peel Eliminator
Improves coating flexibility, bending resistance, and impact resistance by forming a flexible continuous phase within the coating film.
Usage:0.4-0.5% Extrusion
TL815 Toughening & Adhesion Enhancer
Enhances adhesion, wettability, leveling, flexibility, and overall coating durability.
Improves edge coverage while helping prevent sagging and thin edges.
Usage:0.5-1% Extrusion
TS066 Adhesion Promoter
No fuming during application. The coating surface gloss can reach 400–700 GU, delivering a strong and stable chrome appearance.
Usage:2% Extrusion
DD1630 Super Chrome Agent
Allows powder coatings with added ultrafine silver powder to achieve a gloss exceeding 200°, producing a chrome or mirror-like effect.
Usage:0.8-1% Extrusion
AW500F Chrome Effect Agent
Improves the bonding and density of metallic pigments, eliminates two-tone effects, and significantly enhances coverage. Reduces metallic pigment usage and cost.
Usage:0.3-0.5% Extrusion
PSE01 Metallic Pigment Densifier
Promotes aluminum pigment orientation and dispersion, significantly improving hiding power while preventing black specks.
Usage:0.1-0.2% Post-blending
R19 Black Spot Eliminator for Silver Pigments
Prevents pigment accumulation and spitting while improving the dispersion, density, whiteness, and hiding power of metallic and pearlescent pigments.
Usage:0.3-0.6% Post-blending
POL19 Anti-Spitting Agent
Special-effect anti-spitting agent designed primarily for pearlescent and metallic pigments.
Usage:0.4-0.5% Post-blending
POL11 Anti-Spitting Agent
It helps prevent powder spitting and reduces gold pigment dosage by 25%.
Usage:1.5% Post-blending
POL22 Ant-Spitting Agent for Gold Pigment
Micronized PTFE polytetrafluoroethylene/polyethylene copolymer, < 14 μm, melting point 130°C. High PTFE content, for high-slip, lubricity, wear- and scratch-resistance. Does not affect gloss.
Usage:0.3-1% Post-blending
AW807 Silver Pigment Hardener / Modified PTFE Wax
Significantly improves surface hardness and scratch resistance, eliminates fingerprints, and provides excellent dispersion, strong metallic effects, and high gloss.
Usage:0.3-1% Post-blending
AW95 Silver Pigment Hardener / Modified PTFE Wax
It improves pigment dispersion, enhances metallic appearance, and increases gloss. Effectively improve metallic coating hardness and anti-scratchiness.
Usage:0.5-2% Post-blending
POL65A Finger-Print Eliminator for Aluminum Pigment
Significantly improves edge and corner coverage while preventing sagging and black edges with minimal impact on leveling.
Enhances texture definition, prevents substrate exposure, and ensures sharp embossed details.
Usage:0.1-0.2% Extrusion
YW112 Edge Coverage Agent
Provides excellent corrosion resistance, passing a 200-hour saltwater immersion test without rusting or blistering.
Tested and approved by a well-known U.S. company, demonstrating outstanding protective performance.
Usage:3-6% Extrusion
YW281 Special Effect Salt Spray Resistance Agent
Provides stable, long-lasting conductivity and excellent antistatic performance.
Offers excellent thermal stability, high-temperature and chemical resistance, making it ideal for powder coatings and other conductive applications.
Usage:1-5% Extrusion
DZN01 Nano Conductive Agent
Effectively absorbs UV radiation (270–350 nm), improving weather resistance, gloss retention, color retention, and preventing coating degradation.
Enhances long-term coating durability and complies with RoHS and EN71-3 standards.
Usage:0.2-0.5% Extrusion
AS830 UV Absorber
Eco-friendly, halogen-free flame retardant with high efficiency and excellent thermal stability, capable of achieving UL94 V-0 (1.6 mm) rating.
Maintains gloss after baking at 300°C for one hour and is suitable for various polymer materials.
Usage:1-5% Extrusion
TL033 Flame Retardant (Halogen-Free)
Improves corner and edge coverage, preventing coating pull-back and film thinning for uniform film protection.
Especially effective in high-viscosity outdoor acrylic matte and ultra-low-gloss powder coatings.
Usage:0.5-1.5% Extrusion/Post-blending
FD056 Anti-Line-Break Agent
Improves melt flow and film formation, ensuring smooth, uniform coverage at corners and edges while preventing coating pull-back and film thinning.
An economical solution for improving edge and corner coverage in powder coatings.
Usage:0.3-1% Extrusion
FD010 Anti-Line-Break Agent
Improves surface polarity and compatibility, enhancing ink adhesion, sand texture quality, and recycled powder performance.
Maintains coating appearance, gloss, and curing performance across various powder coating systems.
Usage:0.5% Extrusion
JZ01 Printing Agent